Decorative Classic MDF Wall Panelling Kit

Add timeless elegance to your home with the Decorative Classic MDF Wall Panelling Kit.

Designed to create an impressive full-height feature wall, this decorative panelling kit combines large framed panels with smaller inset mouldings to produce a layered, architectural appearance. The additional internal detailing gives each panel greater depth and definition, creating a refined finish that complements both period properties and modern interiors.

The balanced layout is completed with a coordinating capping rail, helping to frame the design and create a seamless transition between the wall and ceiling. Whether installed in a living room, dining room, hallway, bedroom or home office, this kit brings a sophisticated focal point to any space.

Manufactured from high-quality moisture-resistant MDF, each component is precision cut to help achieve a professional-looking finish. Simply arrange the mouldings according to your preferred layout and secure them using a suitable grab adhesive, nails or pins.

Available Finishes:

• Unprimed – Raw moisture-resistant MDF with no primer or paint applied.
• Primed – Finished with a single coat of primer and lightly sanded, ready for final preparation before painting.
• Undercoated – Includes a sanded primer coat followed by a sanded undercoat, leaving only your chosen top coat to apply.
• Matt Grey – Prepared to our undercoated standard before receiving a durable matt grey top coat, allowing the kit to be installed without any additional painting.
• Satin Black – Prepared to our undercoated standard before receiving a durable satin black top coat, allowing the kit to be installed without any additional painting.

Kit Contents:

• 6 x MDF Panel Mouldings – 40mm x 16mm x 850mm
• 6 x MDF Panel Mouldings – 40mm x 16mm x 2100mm
• 6 x MDF Panel Mouldings – 20mm x 16mm x 1800mm
• 6 x MDF Panel Mouldings – 20mm x 16mm x 600mm

One Decorative Classic MDF Wall Panelling Kit will cover approximately 7.2 square metres, based on a wall measuring around 2.4m high by 3m wide when installed in a layout similar to the product images.

All mouldings are supplied with square-cut ends as standard. If your design requires mitred or angled joints, these should be cut during installation.