Classic MDF Wall Panelling Kit

Create a timeless feature wall with the Classic MDF Wall Panelling Kit.

Inspired by traditional interior panelling found in period homes, the Classic design combines elegant proportions with decorative mouldings to create a sophisticated full-height feature wall. The layout uses elongated rectangular panels with smaller lower sections, divided by a matching dado rail to produce a balanced, architectural appearance that suits both classic and contemporary interiors.

Manufactured from high-quality moisture-resistant MDF, every component is precision cut to help achieve a professional finish with minimal effort. Whether you're renovating a living room, hallway, dining room or bedroom, this kit offers a straightforward way to add lasting character and depth to your walls.

Installation is suitable for both experienced decorators and DIY enthusiasts. Simply arrange the mouldings according to your preferred layout and secure them using a suitable grab adhesive, nails or pins before applying your chosen finish.

Available Finishes:

• Unprimed – Raw moisture-resistant MDF with no primer or paint applied.
• Primed – Finished with a single coat of primer and lightly sanded, ready for final preparation before painting.
• Undercoated – Includes a sanded primer coat followed by a sanded undercoat, leaving only your chosen top coat to apply.
• Matt Grey – Prepared to our undercoated standard before receiving a durable matt grey top coat, allowing the kit to be fitted without additional painting.
• Satin Black – Prepared to our undercoated standard before receiving a durable satin black top coat, allowing the kit to be fitted without additional painting.

Kit Contents:

• 1 x Ogee 2 MDF Dado Rail – 70mm x 18mm x 3050mm
• 12 x 324 MDF Panel Moulding – 30mm x 16mm x 350mm
• 24 x 324 MDF Panel Moulding – 30mm x 16mm x 450mm
• 12 x 324 MDF Panel Moulding – 30mm x 16mm x 1450mm

One Classic MDF Wall Panelling Kit will cover approximately 7.2 square metres, based on a wall measuring around 2.4m high by 3m wide when installed in a layout similar to the product images.

All mouldings are supplied with square-cut ends as standard. If your installation requires mitred or angled joints, these should be cut during installation.

Looking for an alternative design? Browse our complete range of MDF Wall Panelling Kits to discover everything from traditional Shaker styles to bold contemporary feature wall designs.