New
New
Zoom the image with the mouse
C-TEC
CT1 Sealant & Adhesive White 290ml
FAQ1:
Can you use CT1 to seal?
FAQ1-ANS:
Yes - CT1 is perfect for use as a sealant. It will seal virtually anything you can think of! It is ideal to use when sealing spouting and guttering and is used by professionals all over the UK.
FAQ2:
What materials will CT1 bond to?
FAQ2-ANS:
All metals (including lead), glass, mirrors, all wood, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials, plastics (except PP, PE and PTFE).
FAQ3:
Who uses CT1?
FAQ3-ANS:
Anyone and everyone uses CT1 including builders, joiners, plumbers, tilers, shopfitters, electricians, signmakers, stonemasons and DIY enthusiasts.
FAQ4:
Can CT1 be used anywhere in the home?
FAQ4-ANS:
Correct! It is suitable to use anywhere in the home including the kitchen! This is because it conforms to EU Food Preparation Regulations.
FAQ5:
How long does CT1 take to dry?
FAQ5-ANS:
The setting time of CT1 depends on the thickness of the bead applied, according to specification, CT1 cures 2-3mm of depth in 24 hours. No shrinkage occures during curing and it will maintain its original volume.
FAQ6:
How long does CT1 take to set?
FAQ6-ANS:
The setting (drying) time of CT1 depends on how thick the bead is, by specification, 2-3mm of CT1 dries every 24 hours.
FAQ7:
Is CT1 waterproof?
FAQ7-ANS:
Due to its combination of properties, CT1 is totally waterproof. CT1 can quicker when wet than dry, and is suitable for use in high-moisture conditions due to its excellent water resistant properties..
FAQ8:
How strong is CT1?
FAQ8-ANS:
The TRIBRID® technology makes CT1 considerably strong. With a 22Kg / cm² tensile strength, it has a high bond strength to withstand pulling forces.
FAQ9:
Is CT1 heat resistant?
FAQ9-ANS:
The thermal stability of CT1 is -40ºC to +90ºC, meaning that it performs well in a wide range of temperatures and stands up well to fluctuating temperatures without cracking or shrinking..
FAQ10:
Can you paint over CT1?
FAQ10-ANS:
Once CT1 has cured, it is suitable for painting. Water-based paints work best with CT1, however Alkyd based paints are not suitable.
£13.14
(Inc. VAT)
£10.95
(Ex. VAT)
Waterproof 
The perfect product to adhere new skirtings and architrave to the wall as well as sealing any gaps and joints - we now proudly offer CT1 Sealant & Adhesive!
CT1 Sealant Or CT1 Adhesive?
CT1 is both a sealant and an adhesive! It replaces the need for separate products by combining applications and mastering them.
So, how can it be used? Check out what it can do below:
- Instantly seals joints
- Super strong and fast adhesion
- Easily repairs settlement cracks
- Leaking gutters instantly sealed and repaired
- Marine based repairs
- Kitchen installations
- Extremely strong and instant multi-purpose sealant, construction and repair adhesive
CT1 uniquely adheres to almost any material and removes the need for additional fixings due to it's strength.
Here's a few of it's features:
- UV resistant
- Environmentally compliant
- Odourless
- Excellent resistant to chemicals
- Contains no solvents
- Does not shrink
- Unique flexibility
Thanks to its unique TRIBRID technology, it is the healthiest choice when a sealant or an adhesive is required - this is the ultimate development in bonding and sealing!
CT1 Technical Data Sheet: https://www.ct1.com/wp-content/uploads/bsk-pdf-manager/2020/09/CT1_Product_Info_sheet_TRIBRID_10_09_2020.pdf
CT1 Safety Data Sheet: https://www.ct1.com/wp-content/uploads/bsk-pdf-manager/2020/02/CT1_TRB_Colours_Excluding_Silver_MSDS_02-10-19-1.pdf
CT1
| Parameter | Details | What this means |
|---|---|---|
| Application Temperature | +5°C to +40°C | This is the temperature range in which you can apply the product. It is suitable for most moderate climates. |
| Flow/Sag | < 3mm | Indicates minimal sagging or movement after application, ensuring it stays in place. |
| Skin Cure (23°C 50% R.H.) | 25 minutes ±5 min | The time it takes for the surface to dry to the touch, making it tack-free. |
| Full Cure Time (23°C 50% R.H.) | 2-3mm/12hrs | The time required for the product to fully harden at various thicknesses. It cures faster for thinner applications and takes longer for thicker ones. |
| Density (ISO 1183-1) | 1.58kg/Ltr | The mass per unit volume, indicating how heavy it is. |
| E-Modulus 100% | 1.15 N/mm² | Measures stiffness. Higher values indicate a stiffer material. |
| Volume Shrinkage After Cure | < 3% | The amount it shrinks after curing, ensuring stability and minimal deformation. |
| Hardness (DIN 53505) | 55° Shore A | Indicates resistance to indentation, useful for determining durability. |
| Tensile Strength | 290 N/mm² (2.90 Mpa) | The maximum stress it can withstand while being stretched or pulled. Higher values indicate stronger material. |
| Thermal Stability | -40°C to +120°C | The temperature range it can withstand without degrading, suitable for extreme conditions. |
| Elongation at Rupture (DIN 53504-S1) | 385% | The ability to stretch before breaking, indicating flexibility. |
| Frost Resistance During Transport | Up to -15°C | The lowest temperature it can endure during transport without being damaged. |
| Curing System | Neutral Cure | The type of curing process, ensuring no acidic or basic byproducts. |
| Non-Toxic | Yes | Safe for use in various environments, including those with stringent health requirements. |
| Certifications | EC1 Plus Certified A+ Indoor Air Comfort GOLD® ISEGA Food Preparation Certificate ETAG 022 |
High standard certification for indoor air quality. Certified safe for use in food preparation areas. Meets European technical approval guidelines. |
| Chemical Resistance | Good: Water, seawater, aliphatic solvents, oils, greases, diluted organic acids Moderate: Esters, Ketones, Aromatics, Chlorine for swimming pools, chlorinated solvents Limitations: Strong acids and alkalis |
Can withstand exposure to these substances without degrading. Can handle occasional exposure but may degrade over time. Not suitable for environments with strong acids or bases. |
| Dirt Attachment | Practically none | Resists dirt accumulation, maintaining a clean appearance. |
| Shelf Life | 18 months | The duration it remains usable when stored properly. |
| Test Standards | 1) Measured to ISO 9040 2) Measured to DIN 53504-S1 3) Measured to DIN 53505 |
Ensures it meets international standards for performance and quality. |
| Additional Information | All above tests according to ISO 11.600 25HM, ETAG 022 Annex E, B & Additional tests of Annex F. | |
CT1 Sealant & Adhesive White 290ml
£13.14
(Inc. VAT)
£10.95
(Ex. VAT)
Frequently Bought Together
Please choose options for all selected products:
Waterproof
The perfect product to adhere new skirtings and architrave to the wall as well as sealing any gaps and joints - we now proudly offer CT1 Sealant & Adhesive!
CT1 Sealant Or CT1 Adhesive?
CT1 is both a sealant and an adhesive! It replaces the need for separate products by combining applications and mastering them.
So, how can it be used? Check out what it can do below:
- Instantly seals joints
- Super strong and fast adhesion
- Easily repairs settlement cracks
- Leaking gutters instantly sealed and repaired
- Marine based repairs
- Kitchen installations
- Extremely strong and instant multi-purpose sealant, construction and repair adhesive
CT1 uniquely adheres to almost any material and removes the need for additional fixings due to it's strength.
Here's a few of it's features:
- UV resistant
- Environmentally compliant
- Odourless
- Excellent resistant to chemicals
- Contains no solvents
- Does not shrink
- Unique flexibility
Thanks to its unique TRIBRID technology, it is the healthiest choice when a sealant or an adhesive is required - this is the ultimate development in bonding and sealing!
CT1 Technical Data Sheet: https://www.ct1.com/wp-content/uploads/bsk-pdf-manager/2020/09/CT1_Product_Info_sheet_TRIBRID_10_09_2020.pdf
CT1 Safety Data Sheet: https://www.ct1.com/wp-content/uploads/bsk-pdf-manager/2020/02/CT1_TRB_Colours_Excluding_Silver_MSDS_02-10-19-1.pdf
CT1
| Parameter | Details | What this means |
|---|---|---|
| Application Temperature | +5°C to +40°C | This is the temperature range in which you can apply the product. It is suitable for most moderate climates. |
| Flow/Sag | < 3mm | Indicates minimal sagging or movement after application, ensuring it stays in place. |
| Skin Cure (23°C 50% R.H.) | 25 minutes ±5 min | The time it takes for the surface to dry to the touch, making it tack-free. |
| Full Cure Time (23°C 50% R.H.) | 2-3mm/12hrs | The time required for the product to fully harden at various thicknesses. It cures faster for thinner applications and takes longer for thicker ones. |
| Density (ISO 1183-1) | 1.58kg/Ltr | The mass per unit volume, indicating how heavy it is. |
| E-Modulus 100% | 1.15 N/mm² | Measures stiffness. Higher values indicate a stiffer material. |
| Volume Shrinkage After Cure | < 3% | The amount it shrinks after curing, ensuring stability and minimal deformation. |
| Hardness (DIN 53505) | 55° Shore A | Indicates resistance to indentation, useful for determining durability. |
| Tensile Strength | 290 N/mm² (2.90 Mpa) | The maximum stress it can withstand while being stretched or pulled. Higher values indicate stronger material. |
| Thermal Stability | -40°C to +120°C | The temperature range it can withstand without degrading, suitable for extreme conditions. |
| Elongation at Rupture (DIN 53504-S1) | 385% | The ability to stretch before breaking, indicating flexibility. |
| Frost Resistance During Transport | Up to -15°C | The lowest temperature it can endure during transport without being damaged. |
| Curing System | Neutral Cure | The type of curing process, ensuring no acidic or basic byproducts. |
| Non-Toxic | Yes | Safe for use in various environments, including those with stringent health requirements. |
| Certifications | EC1 Plus Certified A+ Indoor Air Comfort GOLD® ISEGA Food Preparation Certificate ETAG 022 |
High standard certification for indoor air quality. Certified safe for use in food preparation areas. Meets European technical approval guidelines. |
| Chemical Resistance | Good: Water, seawater, aliphatic solvents, oils, greases, diluted organic acids Moderate: Esters, Ketones, Aromatics, Chlorine for swimming pools, chlorinated solvents Limitations: Strong acids and alkalis |
Can withstand exposure to these substances without degrading. Can handle occasional exposure but may degrade over time. Not suitable for environments with strong acids or bases. |
| Dirt Attachment | Practically none | Resists dirt accumulation, maintaining a clean appearance. |
| Shelf Life | 18 months | The duration it remains usable when stored properly. |
| Test Standards | 1) Measured to ISO 9040 2) Measured to DIN 53504-S1 3) Measured to DIN 53505 |
Ensures it meets international standards for performance and quality. |
| Additional Information | All above tests according to ISO 11.600 25HM, ETAG 022 Annex E, B & Additional tests of Annex F. | |
Frequently Asked Questions
Yes - CT1 is perfect for use as a sealant. It will seal virtually anything you can think of! It is ideal to use when sealing spouting and guttering and is used by professionals all over the UK.
All metals (including lead), glass, mirrors, all wood, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials, plastics (except PP, PE and PTFE).
Anyone and everyone uses CT1 including builders, joiners, plumbers, tilers, shopfitters, electricians, signmakers, stonemasons and DIY enthusiasts.
Related Products
New
Sold out
