Oak Internal Doors

To clean oak doors, use a soft, damp cloth and mild soap. Avoid using abrasive cleaners or harsh chemicals, as they can damage the wood finish. Dry the doors immediately after cleaning to prevent water damage.

To finish oak doors, sand the surface with fine-grit sandpaper to remove any rough spots or imperfections. Apply a stain or finish of your choice, following the manufacturer's instructions. Allow the finish to dry completely before applying a second coat, if desired.

To remove grease marks from oak doors, apply a mixture of baking soda and water to the affected area and scrub with a soft-bristled brush. Rinse with clean water and dry immediately.

To treat oak veneer doors, clean them regularly with a soft, damp cloth and mild soap. Avoid using abrasive cleaners or harsh chemicals, as they can damage the veneer. If the veneer becomes damaged or worn, it may need to be replaced.

Yes, you can paint oak doors. To do so, sand the surface with fine-grit sandpaper to remove any rough spots or imperfections. Apply a primer and allow it to dry completely before applying paint. Use a brush or roller to apply the paint evenly, and allow it to dry completely before applying a second coat, if desired.

To oil oak doors, first clean the surface with a soft, damp cloth and mild soap. Allow the door to dry completely. Apply a thin coat of oil with a brush or cloth, following the manufacturer's instructions. Allow the oil to soak in for a few minutes, then wipe away any excess with a clean cloth.

Yes, you can leave oak doors unfinished or untreated. However, doing so may cause the wood to become discoloured or damaged over time. It is recommended to at least apply a protective coating, such as oil or wax, to help preserve the wood.