Shaker MDF Half Wall Panelling Kit

Add timeless character to your home with the Shaker MDF Half Wall Panelling Kit.

Inspired by traditional Shaker design, this half-height wall panelling kit combines clean lines with balanced proportions to create an elegant feature wall. The wide MDF panelling strips form classic recessed panels, while the matching Ogee 2 MDF Dado Rail provides a refined finishing touch.

Ideal for living rooms, dining rooms, hallways, bedrooms and home offices, this design introduces architectural detail without overpowering the space. By panelling only the lower section of the wall, it leaves the upper half free for paint, wallpaper, artwork or decorative accessories, making it easy to personalise your interior.

Manufactured from high-quality moisture-resistant MDF, every component is precision cut to simplify installation. Simply arrange the mouldings according to your preferred layout and secure them using a suitable grab adhesive, nails or pins before applying your chosen finish.

If you're looking for a full-height alternative, take a look at our Full Wall Shaker MDF Wall Panelling Kit.

Available Finishes:

• Unprimed – Raw moisture-resistant MDF with no primer or paint applied.
• Primed – Finished with a single coat of primer and lightly sanded, ready for final preparation before painting.
• Undercoated – Includes a sanded primer coat followed by a sanded undercoat, requiring only your chosen top coat.
• Matt Grey – Prepared to our undercoated standard before receiving a durable matt grey top coat, allowing the kit to be installed without any additional painting.
• Satin Black – Prepared to our undercoated standard before receiving a durable satin black top coat, allowing the kit to be installed without any additional painting.

Kit Contents:

• 1 x Ogee 2 MDF Dado Rail – 70mm x 25mm x 3050mm
• 2 x Square MDF Panelling Strips – 70mm x 9mm x 3050mm
• 3 x Square MDF Panelling Strips – 70mm x 9mm x 950mm
• 1 x Square MDF Panelling End Strip – 70mm x 9mm x 950mm

One Shaker MDF Half Wall Panelling Kit will cover approximately 3.6 square metres, based on a wall measuring around 1.2m high by 3m wide when installed in a layout similar to the product images.

Please note: Each order includes one end strip to provide a neat finishing edge to the completed panelled section. Only one end strip is supplied per order, regardless of the number of kits purchased.

All mouldings are supplied with square-cut ends as standard. Any mitred or angled cuts required for your installation should be completed during fitting.